LiftMaster 61LM Owners Manual - Page 238
Smart Garage Door Openers
View all LiftMaster 61LM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Owner's Manual Model Series 850 Single-Function Remote Control Model Series 853 Multi-Function Remote Control Model Series 856 Mini Multi-Function Remote Control The 800 Series remote control (with green battery test light) works only with door openers and light controls having a green "SMART" button and WARNING W green indicator light. Programming instructions are described and illustrated below. The additional push buttons on the Multi-Function Remote Controls can also activate other garage door openers and/or light controls. (Instructions for programming light Children operating or playing with a garage door opener can injure themselves or others. The garage door could close and cause serious injury or death. Do not allow children to operate the door control or remote control transmitter(s). products are included with those accessories.) CAUTION A moving garage door could injure or kill someone under it. Activate the opener only when you can see the door clearly, it is free of obstructions, and is properly adjusted. "SMART" GARAGE DOOR OPENERS (With Green "SMART" Button and Green Indicator Light) PROGRAM THE OPENER TO ACCEPT THE REMOTE CONTROL CODE Select a remote control push button to operate the opener. The large button is recommended for use with a garage door opener. 1. Press and HOLD the selected remote control push button (Figure 1). 2. Then press and release the green "SMART" button on the opener panel (Figure 2). The opener light will FLASH once. Release the remote control push button. Now the opener will operate when the remote push button is pressed. NOTE: If the remote push button is not held down until the opener light flashes, the receiver will not accept the code. TO ERASE ALL REMOTE CONTROL CODES • Press and hold the the green "SMART" button on the opener panel until the indicator light turns off (about 6 seconds). ALL the codes the opener has learned will be erased. • To reprogram, repeat Steps 1 and 2 for each remote control in use. Code programming instructions are also located on the opener panel. Figure 1 Series 856 Series 850 Select a remote control push button to operate opener Series 853 Push Button Select a remote control push button to operate opener Figure 2 Garage Door Opener (With AGreVenE"RSmTarItS" BSutEtonM) ENT 1 2 3 Green "Smart" Button 9 1 7 3 5 KG 9 1 7 3 5 KG CAUTION Indicator Light Replacement Parts: Single-Function remote case, cover, screw (circuit board not included) Model 850 Multi-Function remote case, cover,screw (circuit board not included) Model 853 41A3984-5 41A3888-3 Mini Multi-Function remote case, cover and interlocking touch tab strip (circuit board not included) Model 856 41A3985-6 12 Volt battery 10A14 Visor Clip 29C128 114A1747C © 1994, The Chamberlain Group, Inc. All Rights Reserved Printed in Mexico