Lowrance HDS-7 Carbon Operators Manual EN - Page 104

14 Trolling motor autopilot If a MotorGuide Xi5 trolling motor with Pinpoint GPS is connected to the network, then the SmartSteer (autopilot) functionality is available on your HDS Carbon. To use trolling motor autopilot functionality, you need the following: • MotorGuide Xi5 trolling motor with Pinpoint GPS (available from MotorGuide) • MotorGuide Pinpoint GPS Gateway (available from MotorGuide) • NMEA 2000 network For details about installing this equipment, refer to the separate installation manuals that come with the equipment. The Autopilot can automatically control the trolling motor to: • Maintain a set heading • Maintain the vessel's position • Navigate to the cursor position, to a waypoint, or along a route • Follow pre-defined turn patterns • Control the speed of the trolling motor Xi5 trolling motor software If at any time there is an update required for your Xi5 trolling motor, instructions will be made available by MotorGuide, and posted on lowrance.com. Follow the onscreen instructions to update Xi5 software. Safe operation with the autopilot Warning: An autopilot is a useful navigational aid, but DOES NOT replace a human navigator. Switching from automatic navigation to standby mode To switch from autopilot to handheld remote or foot pedal steering, set the autopilot to standby mode. You can select standby mode from the Autopilot Controller or the System Controls dialog. 104 Trolling motor autopilot | HDS Carbon Operator Manual