Lowrance HDS-7 Carbon Operators Manual EN - Page 106
Autopilot control of the trolling motor, Selecting an Arrival mode, Anchor mode, Heading Lock mode
View all Lowrance HDS-7 Carbon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
you can select that the bar is off when the autopilot is in standby mode. Refer to "Autopilot settings" on page 109. Autopilot control of the trolling motor Selecting an Arrival mode The autopilot switches from navigation mode to the selected arrival mode when your vessel reaches the destination. Arrival mode is set to Standby by default. Before starting a navigation mode or a turn pattern, it is important to select an arrival mode that fits your navigation needs. Refer to "Arrival mode" on page 110. Anchor mode Maintains your vessel position at a selected location. Ú Note: When in anchor mode, your vessel orientation can be affected by wind or currents. The following occurs when you select to anchor at: • Waypoint Enables anchor mode when your vessel arrives at a selected waypoint. • Cursor Enables anchor mode when your vessel arrives at the cursor position. • Here Enables anchor mode at your current location. Heading Lock mode Locks and maintains the current vessel heading. Use the left and right arrow buttons in the Autopilot Controller to make heading adjustments. To make small heading adjustments, single-select the left or right buttons. For larger adjustments, select and hold the left or right buttons. Standby mode Cancels autopilot activity and returns the vessel to handheld remote or foot pedal steering control. 106 Trolling motor autopilot | HDS Carbon Operator Manual