Lowrance HDS-7 Carbon Operators Manual EN - Page 79
Internal Sonar, Network Sonar, Overlay downscan, Fishing mode, Depth, Palette
View all Lowrance HDS-7 Carbon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Internal Sonar Select to make the internal Sonar available for selection in the Sonar menu. For more information about panel source selection, refer to the Operator manual. When set to off, this option disables the internal Sonar in the unit. It will not be listed as a Sonar source for any unit on the network. Select this option on a unit which does not have a transducer connected. Network Sonar You can share the Sonar images from this unit with other units connected on the Ethernet network. For more information about how to setup Sonar, refer to the separate HDS Carbon Installation manual. Overlay downscan When a DownScan source is connected to your system, you can overlay DownScan images on the regular Sonar image. When activated, the Sonar menu expands to include basic DownScan options. Select Overlay on the Structure options menu to adjust the level of structure overlay shown on the screen. You can make adjustments using the Overlay slider bar. Fishing mode This feature consists of preset packages of sonar settings designed for specific fishing conditions. Ú Note: Selecting the proper fishing mode is critical to optimal sonar performance. If you completed configuration setup at initial startup, the proper fishing mode has already been selected. Fishing mode General Use Shallow Water Fresh Water Depth ≤ 1,000 ft ≤ 60 ft ≤ 400 ft Palette White background White background White background Sonar | HDS Carbon Operator Manual 79