Lowrance HDS-7 Carbon Operators Manual EN - Page 28

Select active panel In a multiple panel page, only one panel can be active at a time. The active panel is outlined with a border. You can only access the page menu of an active panel. You activate a panel by: • Touch operation: tapping the panel • Key operation: pressing the Panel key Using the cursor on the panel The cursor can be used to measure a distance, to mark a position, and to select items. By default, the cursor is not shown on the panel. Position the cursor by tapping the desired location on the screen or by using the Cursor keys to move the cursor. When the cursor is active, the cursor position window is displayed. To remove the cursor and cursor elements from the panel, press the X key or select the Clear cursor option. GoTo cursor You can navigate to a selected position on the image by positioning the cursor on the panel, then using the Goto Cursor option in the menu. The cursor assist function The cursor assist function allows for fine tuning and precision placement of the cursor without covering details with your finger. Activate the cursor on the panel, then press and hold your finger on the screen to switch the cursor symbol to a selection circle, appearing above your finger. Without removing your finger from the screen, drag the selection circle to the desired position. When you remove your finger from the screen the cursor reverts to normal cursor operation. 28 Basic operation | HDS Carbon Operator Manual