Lowrance HDS-7 Carbon Operators Manual EN - Page 69

Multiple Sonar You can specify the Sonar source for the image in the Sonar panel. You can display two different sources simultaneously, using a split panel configuration. For more information how to select the source for a panel, refer to "Source" on page 71. Zooming the image You can zoom the image by: • using the zoom (+ or -) buttons • pinching or spreading on the screen • using the +/- keys Zoom level is shown on the bottom left side of the image. When zooming in, the sea floor is kept near the bottom of the screen, irrespective of whether it is in auto-range or manual range. If the range is set considerably less than the actual depth, the unit is not able to find the bottom when zooming. If the cursor is active, the unit zooms in where the cursor is pointed. Zoom bar The zoom bar is displayed when you zoom the image. Drag the zoom bar vertically to view different parts of the water column. Using the cursor on the image The cursor can be used to measure a distance to a target, to mark a position, and to select targets. By default, the cursor is not shown on the image. When you position the cursor on the image; the screen pauses, the depth at the cursor position is shown, and the information window and the history bar are activated. To remove the cursor and cursor elements from the panel, select Clear cursor or press the X key. Viewing history Whenever the cursor is shown on the Sonar panel, the scroll bar is shown at the top of the panel. The scroll bar shows the image you Sonar | HDS Carbon Operator Manual 69