Lowrance HDS-7 Carbon Operators Manual EN - Page 114
Changing set heading in AUTO mode, Turn pattern steering, U-turn
View all Lowrance HDS-7 Carbon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
114 Changing set heading in AUTO mode You adjust the set heading by using the port and starboard (1 or 10 degrees) arrow buttons in the Autopilot Controller. When you select the button, an immediate heading change takes place. The new heading is maintained until a new heading is set or until you select another mode for the autopilot. Turn pattern steering The autopilot includes a number of automatic turn steering features when the autopilot is in AUTO mode. Ú Note: Turn pattern steering for outboard motors uses heading information only, while turn pattern steering for the trolling motor uses both GPS and heading information. Therefore, with outboard turn pattern steering, waypoints in the turns are not created and displayed as they are with trolling motor turn patterns. Initiating a turn You start the turn by selecting the relevant turn icon, followed by selecting the port or starboard options in the turn dialog to select the turn direction. Stopping the turn You can stop the turn from within the turn dialog. At any time during a turn you can select Autopilot standby in the System Controls dialog to return to STBY mode and manual steering. Turn variables The turn steering options have settings that you can adjust before you start a turn and at any time when the boat is in a turn. U-turn U-Turn changes the current set heading to be 180° in the opposite direction. The turn rate is identical to Rate limit settings. This cannot be changed during the turn. C-turn Steers the vessel in a circle. Outboard motor autopilot | HDS Carbon Operator Manual