Lowrance HDS-7 Carbon Operators Manual EN - Page 60
Dock-to-dock Autorouting and Easy Routing examples, to accept the routepoints positions.
View all Lowrance HDS-7 Carbon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
- Selection if you want to manually select the routepoints that define the limits for the autorouting, then select the relevant routepoints. Selected routepoints are colored red. Only two routepoints can be selected, and the system discards any routepoints between your selected start and end points. 3. Select Accept to start the automatic routing. - When the automatic routing is completed the route appears in preview mode, and the legs are color coded to indicate safe or unsafe areas. Navionics uses red (unsafe) and green (safe), while C-MAP uses red (unsafe), yellow (dangerous) and green (safe). 4. Move any routepoints if required when the route is in preview mode. 5. Select Keep to accept the routepoints positions. 6. Eventually repeat step 2 (Selection) and step 3 if you want the system to automatically position routepoints for other parts of the route. 7. Select Save to complete the automatic routing and save the route. Dock-to-dock Autorouting and Easy Routing examples • Entire route option used when first and last route points are selected. First and last routepoint Result after automatic routing • Selection option used for autorouting part of a route. 60 Waypoints, Routes, and Trails | HDS Carbon Operator Manual