Lowrance HDS-7 Carbon Operators Manual EN - Page 151
Your vessel’s MMSI number, Icon filters, Course extension lines, Defining dangerous vessels
View all Lowrance HDS-7 Carbon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Your vessel's MMSI number You need to have your own MMSI (Maritime Mobile Service Identity) number entered in the system to receive addressed messages from AIS and DSC vessels. It is also important to have the MMSI number entered to avoid seeing your own vessel as an AIS target on the chart. Ú Note: The Vessel message option in the alarm settings must be toggled on for any MMSI message to be displayed. Icon filters By default, all targets are shown on the panel if an AIS device is connected to the system. You can select not to show any targets, or to filter the icons based on security settings, distance, and vessel speed. Course extension lines You can set the length of the Course Over Ground (COG) extension lines for other AIS vessels. The length of the extension lines is either set as off, as a fixed distance, or to indicate the distance the vessel will move in the selected time period. If Off is selected, then no COG extension lines are shown for the vessel. For information about extension lines for your vessel, refer to "Extension lines" on page 52. Defining dangerous vessels You can define an invisible guard zone around your vessel. When a target comes within the set limits, the symbol changes to the Dangerous target symbol. An alarm is triggered if activated in the Alarm settings panel. AIS | HDS Carbon Operator Manual 151