Lowrance HDS-7 Carbon Operators Manual EN - Page 179
Maintenance, Preventive maintenance, Checking the connectors, Touchscreen calibration
View all Lowrance HDS-7 Carbon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
23 Maintenance Preventive maintenance The unit does not contain any field serviceable components. Therefore, the operator is required to perform only a very limited amount of preventative maintenance. It is recommended that you always fit the supplied protective sun cover when the unit is not in use. Checking the connectors The connectors should be checked by visual inspection only. Push the connector plugs into the connector. If the connector plugs are equipped with a lock, ensure that it is in the correct position. Touchscreen calibration Ú Note: Ensure the screen is clean and dry before doing the calibration. Do not touch the screen unless prompted to do so. In some cases it may be required to re-calibrate the touch screen. To re-calibrate your touchscreen, do the following: 1. Turn the unit off 2. Press and hold the Waypoint key, and turn the unit on 3. Continue to press in the Waypoint key during power on, until the calibration utility screen comes up 4. Follow the instructions on the screen to perform the calibration. When completed, the unit returns to the application screen. NMEA Data logging All serial output sentences sent over the NMEA TCP connection are logged to an internal file. You can export and review this file for service and fault finding purposes. The maximum file size is predefined. If you have added several other files to the system (file recordings, music, pictures, PDF files), this may reduce the allowed file size for the log file. The system logs as much data as possible within the file size limitation, and then it starts overwriting the oldest data. Maintenance | HDS Carbon Operator Manual 179