Lowrance HDS-7 Carbon Operators Manual EN - Page 110

110 Chart compass You can select to show a compass symbol around your boat on the chart panel. The compass symbol is off when the cursor is active on the panel. Autopilot control location Controls the location of the Autopilot controller on the panel. Select active autopilot Selects if the autopilot controls the trolling motor or the outboard motor(s). Auto hide autopilot bar Controls whether the Autopilot information bar is shown when the autopilot is in Standby mode. Arrival mode The trolling motor autopilot switches from navigation mode to the selected arrival mode when your vessel reaches the destination. Ú Note: Before starting a navigation mode or a turn pattern, it is important to select an arrival mode that fits your navigation needs. Arrival modes are: • Standby Cancels autopilot activity and returns the vessel to handheld remote or foot pedal control. • Heading lock Locks and maintains the last vessel heading. • Anchor Anchors the vessel at the current destination. Ú Note: We recommend only using heading lock in open water. Anchor point setup Anchor points can be saved as a new waypoint, replaced with an existing waypoint, or set as your current coordinates. Trolling motor autopilot | HDS Carbon Operator Manual