Lowrance HDS-7 Carbon Operators Manual EN - Page 80

Fishing mode Deep Water Slow Trolling Fast Trolling Clear Water Ice Fishing Depth ≤ 5,000 ft ≤ 400 ft ≤ 400 ft ≤ 400 ft ≤ 400 ft Palette Deep Blue White background White background White background White background Reset fishing mode Resets selected fishing mode to default settings, allowing you to clear settings adjustments made while using a fishing mode. Log sonar Select to start and stop recording of Sonar data. For more information, refer to "Start recording log data" on page 73. This option is also available from the Advanced option in the Sonar menu. View Sonar log Used to view Sonar recordings. The log file is displayed as a paused image, and you control the scrolling and display from the menu. You can use the cursor on the image, measure distance, and set view options as on a live Sonar image. If more than one channel was recorded in the selected Sonar file, you can select which channel to display. You exit the view function by selecting the X in the upper right corner or by pressing the X key. Structure depth offset Setting for Structure transducers. All transducers measure water depth from the transducer to the bottom. As a result, water depth readings do not account for the distance from the transducer to the lowest point of the boat in the water or from the transducer to the water surface. To show the depth from the lowest point of the boat to the bottom, do the following. Before setting the Structure offset, measure the distance from the structure transducer to the lowest point of the 80 Sonar | HDS Carbon Operator Manual