Magnavox MWR20V6 Owners Manual - Page 80

Others Troubleshoxoxtxinxg (cont'd) Error message Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49) Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) Cause •You are trying to record onto the disc on which the number of recording titles comes up to the maximum (99). •You are trying to record onto the VR mode DVD-RW disc on which the number of recording chapters comes up to the maximum (254). Recording Error You cannot record on this disc as Control Information is full. •This disc has no space to write the Control Information when recording or deleting contents. •When editing has been repeatedly performed, the control Information area may come up to be full even the recording area has enough space. Recording Error You cannot record on this disc as Power Calibration Area is full. •When recordings are performed repeatedly onto an unstable disc, this area may come up to be full. •Every time you insert a disc for recording, the disc's working area will be taken up. And if you repeat this frequently, it will be used up sooner and you may not be able to record full 99 titles. Recording Error •You are trying to record onto the This disc is already finalized. disc already finalized. Solution •Delete unnecessary titles (page 55). •This unit cannot delete the original chapter. Delete unnecessary chapter mark using other DVD recorders. Delete unnecessary chapter marks (page 58). •Delete unnecessary titles (page 55). •Insert a new disc. •Release the finalizing for this disc (page 37). Recording Error The disc has a different menu layout. (Set "Replace Disc Menu" to ON to rewrite the menu.) •You are trying to record onto the +VR formatting disc that had been recorded by the other recorder. •Set "Replace Disc Menu" to "ON" to rewrite the menu, after that you will record to disc (page 27). • If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the error description, and call our helpline mentioned on the front page to locate an Authorized Service Center. You can watch the TV programs with the tuner of the unit. (Usually channel 3 or 4 of the TV is available for the RF converter setting.) Be sure to connect the unit to a TV using the RF cable. Refer to page 14. 1 Select channel 3 on your TV. 2 Press [VIDEO/TV] on the remote control. • If noise appears, change the RF output channel of the unit to CH 4 by pressing [VIDEO/TV] for 3 seconds. The RF output channel will alternate between CH3 and CH4 as follows. 80 EN RF output switch STANDBY-ON VIDEO/TV VCR DVD OPEN/CLOSE .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 foPQrRSmorTUeV thaWXnYZ 37 sec8onds9 CLEAR/C-RESET SPACE TITLE 0 RETURN DISPLAY 3 seconds (RF on) COHK4 DISC MENU 3 secSEoTUnPds (RF on) CH3 3 seconds (RF on) CH4 CHANNEL 3 seconds TIMER VCR REC DVD REC REC MODE TIMER SET SLOW CM SKIP RAPID PLAY SEARCH AUDIO DUBBING • Each time the RF output channel is changed, CH3 or CH4 will appear on the front panel display.