Netgear AC815S User Manual - Page 9
Status LED, Dust and Water Resistance, Set Up Your Mobile Hotspot
View all Netgear AC815S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
AirCard 815S Mobile Hotspot Status LED The status LED indicates data connection status: • Blue, slow blink. The mobile hotspot is ready. • Blue, double-blink. The mobile hotspot is transferring data. • Amber, slow blink. The mobile hotspot is not connected to the network. Dust and Water Resistance The mobile hotspot's rugged design is dustproof, shock resistant, and water resistant (IP65 and MIL-STD-810G drop & shock) when both RF doors are closed and the back cover is tightly shut.1 The mobile hotspot is not submersible but will resist a hard stream of water for up to 30 seconds (each side). Set Up Your Mobile Hotspot The mobile hotspot comes with a preinstalled SIM card. To set up your mobile hotspot: 1. Remove the back cover. 2. Insert the battery. Gold pins 1. Meets US MIL-STD-810G for shock resistance. Certified IP65 for protection against dust and water jets. Device will not operate under water and should be dried as quickly as possible when wet. Shock-resistant when dropped from ≤ 4 feet onto flat surface. Device may not perform as shown in all extreme conditions. Get Started 9