Nikon COOLPIX S9500 Reference Manual - Page 227
Troubleshooting, Power, Display, Settings Issues
View all Nikon COOLPIX S9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Refer to the page numbers in the right-most column for more information. • See "Error Messages" (E91) for more information. Power, Display, Settings Issues Problem The camera is on but does not respond. Cause/Solution A • Wait for recording to end. - • If the problem persists, turn the camera off. If the camera does 19 not turn off, remove and reinsert the battery or batteries or, if you are using an AC adapter, disconnect and reconnect the AC adapter. Note that although any data currently being recorded will be lost, data that have already been recorded will not be affected by removing or disconnecting the power source. The battery inserted in the camera cannot be Confirm all connections. 12 charged. • Off is selected for Charge by computer in the setup menu. 98, E80 • When charging by connecting the camera to a computer, E80 The battery cannot battery charging stops when the camera is turned off. be charged by • When charging by connecting the camera to a computer, E80 connecting the battery charging stops when the computer is suspended camera to a (sleeping), and the camera may turn off. computer. • Depending upon computer specifications, settings, and status, - charging the battery inserted in the camera may not be possible via computer connection. Camera cannot be turned on. Battery is exhausted. 18 Camera turns off without warning. • Battery is exhausted. 18 • If no operations are performed for a while, camera has turned 19 off automatically by auto off to save power. • The camera turns off if the Charging AC Adapter is connected 14 while the camera is on. • The camera turns off if the USB cable connecting it to a 77, 80, computer or printer is disconnected. Reconnect the USB cable. E22 • Inside of the camera has become hot. Leave the camera off - until the inside of the camera has cooled. • At low temperatures, the camera and the battery may not F3 function normally. Technical Notes and Index F7