Olympus C-2040 Zoom C-2040 Zoom Reference Manual - Page 117

Using the self-timer and remote control Using the optional remote control to take pictures Custom Photography P A/S/M 1 Set the camera on such as a tripod and compose the 15° 15° shot. q When you point the remote control at the remote control receiver on the camera and press the W or T button on the remote control, you can use the zoom. The self-timer/remote control lamp on the camera flashes during zooming. 9.8 ft 9.8 ft 4 16.4 ft 2 When you press the shutter button on the remote control, the self-timer/remote control lamp on the camera flashes for 3 seconds and then the 2 shutter releases. q If the self-timer/remote control lamp does not flash when you press the shutter button, move closer to the camera and press it again. (Radio wave interference can prevent the lamp from flashing. If this occurs, change the channel as directed in the instructions for the remote control.) remote control receiver Self-timer/remote control lamp • See P.144 for information on using the remote control to play back images. • In very bright conditions, such as in sunlight, the effective range of the remote control is reduced. • Do not shine bright lights directly at the remote control receiver. • Self-timer/remote control mode is not cancelled after you take a picture. 117