Olympus C-2040 Zoom C-2040 Zoom Reference Manual - Page 130
Press, to select, and then press the [OK], button., Press the [OK] button.
View all Olympus C-2040 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
ER/MODE Selecting the flash timing (Slow Synchro) 3 Press or to select " 1" or " 2" and then press the [OK] button. q" " appears on the control panel. q When you select " 2", the built-in flash fires a pre-flash before the main flash. q You can still take pictures at this point. 5 4 Press the [OK] button. q The setting is saved and you exit the menu screen. 3 A/S/M P OFF POW 34 P F2.0 1/800 SLOW OFF DIGITAL ZOOM SLOW 1 FUNCTION SLOW 2 0.0 DIAL Using Flash [2/3] Control panel Slow Synchro mode • When you use the FL-40 external flash, the external flash is controlled by the same setting. • Because this mode uses slow shutter speeds, a tripod should be used to prevent camera shake. • This mode can be used for external flash units as well as the built-in flash. • Unless you select "OFF" in the "ALL RESET" setting (P.173), this setting will 130 be cancelled when you switch the camera off.