Olympus C-2040 Zoom C-2040 Zoom Reference Manual - Page 14

Important safety instructions NOTES LCD Display and Backlight ● Do not point the viewfinder towards strong light like the sun, as this may damage interior of the viewfinder. ● The backlight built into the monitor and control panel has a limited service life. When the monitor gets dark or flickers, consult your nearest Olympus dealer. ● In places subject to low temperatures, the backlight may take a long time to turn on or its color may change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm place. A backlight exhibiting poor performance due to low temperatures will recover in normal temperatures. ● Do not push the monitor forcibly; otherwise the image may become vague, resulting in a Display mode failure or damage to the monitor. ● When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is not a malfunction; It will be less noticeable in Display mode. ● A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction. ● The LCD display is made with high-precision technology. However, black spots or bright spots of light may appear constantly on the LCD display. Due to its characteristics or the angle at which you are viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction. 14