Olympus C-2040 Zoom C-2040 Zoom Reference Manual - Page 177

Setting the image clarity (Sharpness) Use the procedure below to set the image sharpness. The "NORMAL" setting gives sharp edges in the image and is useful for showing detail in prints, etc. The "SOFT" setting gives softer outlines and is best used for images intended for image processing. The "HARD" setting further enhances the image outlines to give a bolder image. Select the appropriate setting for your purposes. DIAL ER/MODE P A/S/M 1 Display the MODE SETUP screen. q Perform steps 1-3 in "Using the MODE SETUP menu screen". (P.170) 23 A/S/M P OFF POW 2 Use or on the Arrow pad to select "SHARPNESS" and then 34 press . 8 3 Press or to select "NORMAL", "SOFT" or "HARD" and then press the [OK] button. ALL RESET WB + - SHARPNESS CONTRAST ON RED• • •x• • •BLUE NORMAL NORMAL 4 Press the [OK] button repeatedly until the menu disappears. [1/4] (This screen shows the still photography menu.) ALL RESET WB + - SHARPNESS CONTRAST NOHRAMRDAL NORMAL SOFT [1/4] Mode setup • The selected setting is retained until changed, even when the camera is switched off. 177