Olympus C-2040 Zoom C-2040 Zoom Reference Manual - Page 173

Restoring the original settings when the camera is switched off (ALL RESET) This setting allows you to select the camera settings that will be valid the next time you switch the camera on. If you select "ON", all the settings shown on P.174 will revert to their default values. If you select "OFF",0 the settings that are valid just before you switch the camera off are saved. You can also use the CUSTOM setting to customize the camera settings. (P.175) DIAL Mode setup P A/S/M 1 Display the MODE SETUP screen. q Perform steps 1-3 in "Using the MODE SETUP menu screen". (P.170) 2 Use or on the Arrow pad to select "ALL RESET" and then press . 3 Press or to select "OFF" or "ON" and then press the [OK] button. q If you select "ON", the camera settings revert to their default values when you switch the camera off. q If you select "OFF", the camera settings are retained when you switch the camera off. 4 Press the [OK] button repeatedly until the menu disappears. ER/MODE 23 A/S/M P OFF POW 34 8 ALL RESET W B + - SHARPNESS CONTRAST ON RED• • •x• • •BLUE NORMAL NORMAL [1/4] (This screen shows the still picture shooting menu.) ALL RESET WB SHARPNESS CONTRAST OFF ON CUSTOM [1/4] 173