Panasonic BL-C111A Operating Instructions - Page 133
Configuring Your Camera for IPv6
UPC - 037988845149
View all Panasonic BL-C111A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
10.3 Configuring Your Camera for IPv6 10.3 Configuring Your Camera for IPv6 When the [Connection Mode] on the [Network (IPv6)] page is set to [Automatic Setup], an IPv6 address is automatically assigned to the camera. To assign a static IPv6 address, follow the procedure below. 1. Click the [Setup] tab. 2. On the left side of the screen under [Basic], click [Network (IPv6)]. 3. Select the desired connection mode, then make the appropriate settings as described in this section. - [Automatic Setup]: The camera is automatically assigned an IPv6 prefix from the IPv6 router, and produces an original IPv6 address based on the IPv6 prefix. - [Static]: Allows you to set all network settings manually. [Automatic Setup] 1. Under [DNS], enter the IP addresses of the primary and secondary DNS servers provided by your ISP. 2. Under [Max. Bandwidth Usage], select the maximum bandwidth you want to allow the camera to use. 3. Under [Connection Type], select the appropriate connection type. • Normally you can leave this setting at [Auto Negotiation]. • BL-C131A only: If using the camera in wireless mode, [Auto Negotiation] must be selected. 4. Click [Save]. 5. When the [New settings are saved.] message is displayed, click [Restart]. Note • The current network settings can be confirmed on the [Status] page (see Page 119). You can also confirm the camera's IPv6 address using the Setup Program. Operating Instructions 133