Pentax RS1000 RS1000 Optio RS1000 - Page 101

6 Press the 3 button. The camera returns to capture status. Refer to the section "To Set the White Balance Manually" for instructions on adjusting the white balance manually. Saving the White Balance setting 1p.110 Taking Pictures To Set the White Balance Manually Have a blank sheet of white paper or similar material ready. 3 1 In the [White Balance] screen, use the four-way controller (23) to select K (Manual). 2 Point the camera at the blank White Balance sheet of paper or other material so that it fills the frame displayed in the center of the screen. SHUTTER Adjust MENU Cancel OK OK 3 Press the shutter release button fully. The white balance is automatically adjusted. 4 Press the 4 button. The setting is saved and the [A Rec. Mode] menu reappears. 5 Press the 3 button. The camera returns to capture status. Setting the Exposure (EV Compensation) You can adjust the overall brightness of the picture. Use this function to take pictures that are intentionally overexposed or underexposed. 1 Press the 3 button in A mode. The [A Rec.Mode] menu appears. 99