Pentax RS1000 RS1000 Optio RS1000 - Page 201

Problem Cause Remedy The subject is not in focus The subject is difficult to focus on with autofocus The camera may have difficulty in focusing on subjects such as: low contrast subjects (a white wall, a blue sky, etc.), dark subjects, finely-patterned objects, rapidly-moving objects. It is also difficult to get proper focus when shooting through a window or a net. Try shooting using the focus lock (p.64). The subject is not in the focusing area Locate the desired subject in the focus frame (focusing area) in the center of the display. If it is difficult to do so, first lock the focus on the desired subject (focus lock), and then move the camera to recompose. The flash mode is set to a (Flash Off) Set to Auto or b (Flash On) (p.92). The drive mode is set The flash does not to j, K or I discharge The focus mode is set The flash does not discharge in these to s modes. The shooting mode is set to C Very occasionally, static electricity may cause camera malfunction. In this case, remove the battery and install it again. If the camera is then working properly, normal operation is restored and you can continue using the camera. 8 Appendix 199