Pentax RS1000 RS1000 Optio RS1000 - Page 112

Taking Pictures Saving the Settings (Memory) The Memory function is for saving the current camera settings when the camera is turned off. For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for others you can choose O or P (Off) (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O or P in the Memory function are shown in the table below. (Items not 3 listed here are always saved in the selected settings when the camera is turned off.) If you select O, the settings will be saved in the status they were in immediately before the camera was turned off. If you select P, the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is O or P. Item Description Default Setting Page Face Detection The Face Detection mode set with the I button. P p.67 Flash Mode The flash mode set with the four-way controller (4) O p.92 Drive Mode The drive mode set with the four-way controller (2) P p.85 p.86 Focus Mode The focus mode set with the four-way controller (5) P p.94 Zoom Position The zoom position set with the Zoom button P p.73 White Balance The [White Balance] setting on the [A Rec.Mode] menu P p.98 Sensitivity The [Sensitivity] setting on the [A Rec.Mode] menu P p.101 EV The [EV Compensation] setting on the Compensation [A Rec.Mode] menu P p.99 Digital Zoom The [Digital Zoom] setting on the [A Rec.Mode] menu O p.75 DISPLAY The information display mode set with the 4/W button P p.20 File No. If a new SD Memory Card is inserted when On has been selected, file numbers are assigned sequentially. O - 110