Pentax RS1000 RS1000 Optio RS1000 - Page 50

Getting Started 8 1 Use the four-way controller (23) to change the month. Change the day and year in the same manner. Next, change the time. If you selected [12h] in Step 4, the setting switches between am and pm corresponding to the time. Date Adjustment Date Format mm/dd/yy 24h Date 01/01/2010 Time 00:00 Settings complete MENU Cancel 9 Press the four-way controller (3) to select [Settings complete]. 10 Press the 4 button. The setting is saved and the camera returns to capture status. [Language/ ], [Date], [Time], [Hometown], and [DST] can be changed. Refer to the pages below for instructions. • To change the language, follow the steps in "Changing the Display Language" (1p.167). • To change the date and time, follow the steps in "Changing the Date and Time" (1p.162). • To change the city or turn DST on and off, follow the steps in "Setting the World Time" (1p.165). When the [Initial Setting] or [Date Adjustment] screen is displayed, you can cancel the setting operation and switch to the capture mode by pressing the 3 button. In this case, the [Initial Setting] screen will appear next time you turn the camera on. If you press the 4 button in Step 10, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds. The video output format (NTSC/PAL) is set to the format of the city selected in [Hometown] on the [Initial Setting] screen. Refer to "List of World Time Cities" (p.204) for the video output format of each city that is set at the time of the initial setting, and "Changing the Video Output Format" (p.169) for changing the video output format. 48