Pentax RS1000 RS1000 Optio RS1000 - Page 173
Using the Power Saving Function, to select [Power
UPC - 027075172593
View all Pentax RS1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Using the Power Saving Function You can save battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the display returns to the ordinary brightness by pressing any of the buttons. 1 Press the 3 button in Q mode. [W Setting] menu appears. When you press the 3 button in A mode, press the four-way controller (5) once. 2 Use the four-way controller (23) to select [Power Saving]. 3 Press the four-way controller (5). A pull-down menu appears. 4 Use the four-way controller (23) Setting 2/3 to select the time until the camera Video Out 2min. enters power saving mode. Brightness Level 1min. Power Saving 30sec. 6 Choose from [2min.], [1min.], [30sec.], Auto Power Off 15sec. [15sec.], [5sec.] or [Off.]. Reset Delete all 5sec. Off MENU Cancel OK OK 5 Press the 4 button. The setting is saved. • Power Saving does not function in the following situations: - in the playback mode - while recording a movie - while the camera is connected to a computer - while a menu is being displayed • When no operation is performed right after the camera is turned on, Power Saving is activated only after 15 seconds elapse even if [5sec.] is set. Settings 171