Pioneer AVH P3100DVD Owner's Manual - Page 52

Section 15 Initial Settings 1 Touch PIN Code Input on the initial menu. PIN code input display appears. 2 Touch 0 to 9 to input the PIN code of your Bluetooth audio player. # To cancel the inputted numbers, touch C. 3 After inputting PIN code (up to 16 digits), touch . The PIN code you entered is stored in this system. Correcting distorted sound You can minimize distortion that may be caused by the equalizer curve settings. Setting an equalizer level high can cause distortion. If high sound is crippled or distorted, try switching to Low. Normally, leave the setting at High to ensure quality sound. ! Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function. % Touch Digital ATT on the initial menu to switch the digital attenuator setting. Touch Digital ATT repeatedly until the desired setting appears in the display. ! High - High quality sound ! Low - Minimize distortion sound Please see the following section for Auto TA and EQ operation. Refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 90 Resetting the audio functions You can reset all audio functions except volume. ! Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function. 1 Touch Audio Reset on the initial menu. 2 Touch Reset. 3 Touch Reset again to reset audio functions. # To cancel resetting the audio functions, touch Cancel. Auto TA and EQ (auto-time alignment and autoequalizing) The auto-time alignment is automatically adjusted for the distance between each speaker and the listening position. The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto-equalizer curve based on that information. ! Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function. 52 En