Pioneer VSX-830-K Owner's Manual - Page 27
To bi-wire a speaker, connect two speaker cords to the speaker terminal on the receiver.
View all Pioneer VSX-830-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
03 Connecting your equipment (In case of VSX-1130) Sound signal priority High picture quality Bi-wiring your speakers Your speakers can also be bi-wired if they support bi-amping. ! With these connections, the Speaker System setting makes no difference. CAUTION ! Don't connect different speakers from the same terminal in this way. ! When bi-wiring as well, heed the cautions for bi-amping shown above. % To bi-wire a speaker, connect two speaker cords to the speaker terminal on the receiver. Using a banana plug for the second connection is recommended. About the audio connection Types of cables and terminals HDMI Transferable audio signals HD audio Digital (Coaxial) Digital (Optical) Conventional digital audio RCA (Analog) (White/Red) Conventional analog audio ! With an HDMI cable, video and audio signals can be transferred in high quality over a single cable. ! For HD audio, see About HDMI on page 28 . About the video converter The video converter ensures that all video sources are output through the HDMI OUT 1 and HDMI OUT 2 terminals. If the TV is only connected to the receiver's composite VIDEO MONITOR OUT jacks, all the other video devices must be connected through composite connections. If several video components are assigned to the same input function (see The Input Setup menu on page 59) , the converter gives priority to HDMI, component, then composite (in that order). Terminal for connection with source device Terminal for connection with TV monitor HDMI IN PR PB Y COMPONENT VIDEO IN VIDEO IN HDMI OUT VIDEO MONITOR OUT Video signals can be output Notes ! Among the HDMI input signals for this receiver, 1080p can be up-converted to 4K. However, this is limited to when connected with 4K compatible televisions. Please set SCAL settings to AUTO (page 88 ). ! The video converter may not operate and the video may not be output depending on the input signal. In such case, put the SCAL settings to PURE and connect both the input equipment and the TV with the same type of cable (page 88 ). ! In principle, input signals from COMPONENT VIDEO IN and VIDEO IN are output from the HDMI terminal without resolution conversion. Depending on the resolution of the connected television, there maybe cases where video does not output to the screen. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. 27