Pioneer VSX-830-K Owner's Manual - Page 43
Hdmi Out, Hdmi Setup, 4k/60p, Bd
View all Pioneer VSX-830-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
04 Connecting your equipment (In case of VSX-830) ! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables. - When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT terminal, so there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup on page 83 ). After setting the ARC, some time may be required for the connected device to be recognized and the sound to be produced. - If you use a coaxial digital audio cable, you'll need to tell the receiver which digital or analog audio input you connected the TV to (see The Input Setup menu on page 59 ). - Please refer to the TV's operation manual for directions on connections and setup for the TV. ! If the TV to be connected using HDMI supports 4K/60p, you can switch the 4K/60p signal output setting in accordance with TV performance. When the 4K/60p setting is changed to 4:4:4, the video image may not be output normally unless the HDMI cable supports 4K/60p 4:4:4 24 bit (18 Gbps transmission). In such a case, select 4:2:0 (page 89 ). ! You cannot input 4K/60p 4:4:4 24 bit video from HDMI IN 3 to the IN 5 terminal. Use the BD IN, HDMI IN 1 or HDMI IN 2 terminal. About video outputs connection This receiver is not loaded with a video converter. When you use HDMI cables for connecting to the input device, the same cables should be used for connecting to the TV. The signals input from the analog (composite) video inputs of this unit will not be output from the HDMI OUT terminal. Playback component IN IN Terminal for connection HDMI VIDEO with source device OUT HDMI MONITOR OUT VIDEO Terminal for connection with TV monitor The OSD will not appear. TV Video signals can be output. 43