Pioneer VSX-830-K Owner's Manual - Page 69

06 Basic playback Listen to music on the unit from a Bluetooth capable device 1 A Bluetooth connection will be created between the Bluetooth capable device and the unit. Procedures for connecting to the unit should be performed from the Bluetooth capable device. ! Please refer to the user's manual for your Bluetooth capable device for details of the connection procedures. 2 Playback music from the Bluetooth capable device. This receiver's remote control buttons can be used for basic playback of files stored on Bluetooth wireless technology devices. ! When the Network Standby and Bluetooth Setup for Network, Bluetooth settings are set as ON, the main power of this receiver will automatically be on by playing the equipment using the Bluetooth function. ! When play is started on the equipment with the Bluetooth function, the zone input set at Play ZONE Setup will automatically switch to BT AUDIO. ! Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in the remote control buttons. VSX-1130 VSX-830 3 While listening to a source, set the remote control to the receiver operation mode, then press ADV repeatedly to select SOUND RETRIEVER AIR. Notes ! With this receiver, when an iPod is connected or disconnected while the music of a Bluetooth wireless technol- ogy device is playing, the connection with the Bluetooth wireless technology device may be canceled. ! The SOUND RETRIEVER AIR listening mode can only be selected when the BT AUDIO input. Radio wave caution This unit uses a 2.4 GHz radio wave frequency, which is a band used by other wireless systems (see list below). To prevent noise or interrupted communication, do not use this unit nearby such devices, or make sure these devices are switched off during use. ! Cordless phones ! Cordless facsimiles ! Microwave ovens ! Wireless LAN devices (IEEE802.11b/g) ! Wireless AV equipment ! Wireless controllers for game systems ! Microwave-based health aids ! Some baby monitors Other, less common, equipment that may operate on the same frequency: ! Anti-theft systems ! Amateur radio stations (HAM) ! Warehouse logistic management systems ! Discrimination systems for train or emergency vehicles Notes ! In the event noise appears in your television image, there is the possibility that a Bluetooth wireless technology enabled device or this unit (including products supported by this unit) are causing signal interference with the antenna input connector of your television, video, satellite tuner, etc. In this event, increase the distance between the antenna input connector and the Bluetooth wireless technology enabled device or this unit (including products supported by this unit). ! If there is something obstructing the path between this unit (including devices supported by this unit) and the device equipped with Bluetooth wireless technology (such as a metal door, concrete wall, or insulation containing tinfoil), you may need to change the location of your system to prevent signal noise and interruptions. Scope of operation Use of this unit is limited to home use. (Transmission distances may be reduced depending on communication environment). In the following locations, poor condition or inability to receive radio waves may cause the audio to be interrupted or stopped: ! In reinforced concrete buildings or steel framed or iron-framed buildings. ! Near large metallic furniture. ! In a crowd of people or near a building or obstacle. ! In a location exposed to the magnetic field, static electricity or radio wave interference from radio communica- tion equipment using the same frequency band (2.4 GHz) as this unit, such as a 2.4 GHz wireless LAN device (IEEE802.11b/g) or microwave oven. ! If you live in a heavily populated residential area (apartment, townhouse, etc.) and if your neighbor's microwave is placed near your system, you may experience radio wave interference. If this occurs, move your unit to a different place. When the microwave is not in use, there will be no radio wave interference. Radio wave reflections The radio waves received by this unit include the radio wave coming directly from the device equipped with Bluetooth wireless technology (direct wave) and waves coming from various directions due to reflections by walls, furniture and building (reflected waves). The reflected waves (due to obstacles and reflecting objects) further produce a variety of reflected waves as well as variation in reception condition depending on locations. If the audio cannot be received properly due to this phenomenon, try moving the location of the device equipped with Bluetooth wireless technology a little. Also note that audio may be interrupted due to the reflected waves when a person crosses or approaches the space between this unit and the device equipped with Bluetooth wireless technology. Precautions regarding connections to products supported by this unit ! Complete connections for all devices supported by this unit, including all audio cords and power cables before connecting them to this unit. ! After completing connections to this unit, check the audio and power cables to confirm that they not twisted together. ! When disconnecting this unit, confirm that you have sufficient working space in the surrounding area. ! When changing connections of audio or other cables for products supported by this unit, confirm that you have sufficient working space in the surrounding area. 69