Pioneer VSX-830-K Owner's Manual - Page 29

03 Connecting your equipment (In case of VSX-1130) ! When connecting to an HDMI/DVI-compatible monitor using the HDMI OUT 2 terminal, switch the HDMI output setting to OUT 2 or OUT 1+2. See Switching the HDMI output on page 89. Also, MAIN/HDZONE must be set to MAIN beforehand (page 110) . ! For input components, connections other than HDMI connections are also possible (see Connecting your DVD player with no HDMI output on page 29 ). ! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables. - When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT terminal, so there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup on page 83 ). After setting the ARC, some time may be required for the connected device to be recognized and the sound to be produced. - If you use a coaxial digital audio cable or RCA (analog) audio cable, you'll need to tell the receiver which digital or analog audio input you connected the TV to (see The Input Setup menu on page 59) . - Please refer to the TV's operation manual for directions on connections and setup for the TV. ! If the TV to be connected using HDMI supports 4K/60p, you can switch the 4K/60p signal output setting in accordance with TV performance. When the 4K/60p setting is changed to 4:4:4, the video image may not be output normally unless the HDMI cable supports 4K/60p 4:4:4 24 bit (18 Gbps transmission). In such a case, select 4:2:0 (page 89) . ! You cannot input 4K/60p 4:4:4 24 bit video from HDMI IN 3 to the IN 6 terminal. Use the BD IN, HDMI IN 1 or HDMI IN 2 terminal. ! The HDMI OUT 2 terminal outputs 4K/60p 4:4:4 24 bit video when MAIN/HDZONE is set to MAIN. When it is set to HDZONE, the 4K/60p 4:4:4 24 bit video is not output. Connecting your DVD player with no HDMI output This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback component with no HDMI output) to the receiver. HDMI/DVI-compatible monitor DVD player, etc. HDMI IN Select one Select one VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT DIGITAL OUT VIDEO Y PB PR R ANALOG L OPTICAL COAXIAL HDMI OUT 2 1 1 BD HDZONE/MAIN MAIN SELECTABLE ARC CONTROL (DVD) HDMI IN 2 3 (SAT/CBL) VIDEO IN COMPONENT VIDEO ASSIGNABLE VIDEO (SAT/CBL) 1 PR DVD L DVD R PB SAT/ L CBL Y R ASSIGNABLE SAT/CBL ANALOG 1 (CD) AUDIO IN ASSIGNABLE 1 - 6 4 6 /MHL (OUTPUT 5 V 0.9 A MAX) DIGITAL IN 1 (TV) OPTICAL ASSIGNABLE 1 (SAT/CBL) COAXIAL ASSIGNABLE HDMI OUT 2 1 1 1 BD HDZONE/MAIN MAIN SELECTABLE ARC CONTROL (DVD) HDMI IN 2 3 (SAT/CBL) ASSIGNABLE 1 - 6 4 6 /MHL (OUTPUT 5 V 0.9 A MAX) VIDEO IN COMPONENT VIDEO ASSIGNABLE VIDEO (SAT/CBL) 1 PR DVD L DVD R PB SAT/ L CBL Y R ASSIGNABLE SAT/CBL ANALOG 1 (CD) AUDIO IN DIGITAL IN 1 (TV) OPTICAL ASSIGNABLE 1 (SAT/CBL) COAXIAL ASSIGNABLE ! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables (page 28) . - When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT 1 terminal, so there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup on page 83) . ! When connecting to a DVD player with an optical digital audio cable or a coaxial digital audio cable, performing input terminal settings are necessary (page 59 ). ! If HDZONE is set to on, video images connected using a video cable or component cable are not output from the HDMI terminal. To output video images, turn HDZONE off (page 89 ). 29