Pioneer VSX-830-K Owner's Manual - Page 34
Connect the speaker to the surround back speaker terminal., Connect a TV monitor to the HDMI OUT 2 - specification
View all Pioneer VSX-830-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
03 Connecting your equipment (In case of VSX-1130) Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE) Important ! The settings must be changed at ZONE Setup in order to use the HDZONE function (page 110 ). ! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI Setup on page 83. ! You must select HDZONE in Speaker system setting (page 106 ) to use this setup. 1 Connect the speaker to the surround back speaker terminal. Which speaker terminal is connected defers depending on the Speaker System (page 106) setting. For details, see Installing your speaker system on page 24 . The following figure shows the connection of the surround back speaker terminal. 2 Connect a TV monitor to the HDMI OUT 2 (HDZONE) terminal on this receiver. Sub zone (HDZONE) HDMI IN 2 Main zone HDMI OUT 2 1 HDZONE/MAIN MAIN SELECTABLE ARC CONTROL HDMI OUT 2 1 HDZONE/MAIN MAIN SELECTABLE ARC CONTROL SURROUND BACK R L (Single) HDZONE / BI-AMP SURROUND BACK R L (Single) L R 1 HDZONE / BI-AMP Connecting to the network through LAN interface By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand. When connected in this way, you can play audio files stored on the components on the local network, including your computer. NETWORK 1 NETWORK Internet Modem NAS to LAN port Computer LAN 3 2 1 WAN Router to LAN port LAN cable (sold separately) Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP server function) with a straight LAN cable (CAT 5 or higher). Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server function, it is necessary to set up the network manually. For details, see Setting network connection on page 52 . LAN terminal specifications ! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX) Notes ! When connecting the wireless LAN, please use with the wireless LAN antenna upright. ! The range of movement of the wireless LAN antenna is as indicated in the diagram below. There is danger that you may break it if unnecessary force is applied. Wireless LAN antenna 1 ! Refer to the operation manual of the equipment you have as the connected equipment and connection method may differ depending on your Internet environment. ! When using a broadband Internet connection, a contract with an Internet service provider is required. For more details, contact your nearest Internet service provider. 34