Pioneer VSX-830-K Owner's Manual - Page 30

03 Connecting your equipment (In case of VSX-1130) Connecting your TV with no HDMI input This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback component) to the receiver. Important ! With these connections, the picture is not output to the TV even if the DVD player is connected with an HDMI cable. Connect the receiver and TV using the same type of video cable as used to connect the receiver and player. ! Also, when the receiver and TV are connected by anything other than an HDMI cable, the OSD function allowing display of the receiver's settings, operations, etc., on the TV's screen cannot be used. In this case, watch the receiver's front panel display while performing the various operations and making settings. DVD player, etc. TV ! In order to listening to HD audio with this receiver, connect an HDMI cable, and use analog video cable for video signal input. Depending on the player, it may not be possible to output video signals to both HDMI and other video output (composite, etc.) simultaneously, and it may be necessary to make video output settings. Please refer to the operating instructions supplied with your player for more information. ! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables (page 28) . ! When connecting to a DVD player with an optical digital audio cable or a coaxial digital audio cable, performing input terminal settings are necessary (page 59 ). Connecting a satellite/cable receiver or other set-top box Satellite and cable receivers, and terrestrial digital TV tuners are all examples of so-called 'set-top boxes'. When you set up the receiver you'll need to tell the receiver which input you connected the set-top box to (see The Input Setup menu on page 59 ). STB VIDEO IN VIDEO VIDEO OUT VIDEO HDMI OUT Select one DIGITAL OUT OPTICAL COAXIAL AUDIO OUT R ANALOG L VIDEO OUT VIDEO Select one AUDIO OUT DIGITAL OUT R ANALOG L OPTICAL COAXIAL HDMI OUT 2 1 1 BD HDZONE/MAIN MAIN SELECTABLE ARC CONTROL (DVD) VIDEO IN COMPONENT VIDEO ASSIGNABLE VIDEO (SAT/CBL) 1 PR DVD L DVD R SAT/ CBL MONITOR OUT PB L Y R ASSIGNABLE SAT/CBL ANALOG 1 (CD) AUDIO IN HDMI IN 2 3 (SAT/CBL) ASSIGNABLE 1 - 6 4 6 /MHL (OUTPUT 5 V 0.9 A MAX) DIGITAL IN 1 (TV) OPTICAL ASSIGNABLE 1 (SAT/CBL) COAXIAL ASSIGNABLE HDMI OUT 2 1 1 1 BD HDZONE/MAIN MAIN SELECTABLE ARC CONTROL (DVD) HDMI IN 2 3 (SAT/CBL) ASSIGNABLE 1 - 6 4 6 /MHL (OUTPUT 5 V 0.9 A MAX) VIDEO IN COMPONENT VIDEO ASSIGNABLE VIDEO (SAT/CBL) 1 PR DVD L DVD R SAT/ CBL MONITOR OUT PB L Y R ASSIGNABLE SAT/CBL ANALOG 1 (CD) AUDIO IN DIGITAL IN 1 (TV) OPTICAL ASSIGNABLE 1 (SAT/CBL) COAXIAL ASSIGNABLE HDMI OUT 2 1 1 1 BD HDZONE/MAIN MAIN SELECTABLE ARC CONTROL (DVD) HDMI IN 2 3 (SAT/CBL) ASSINABLE 1 - 6 4 6 /MHL (OUTPUT 5 V 0.9 A MAX) VIDEO IN COMPONENT VIDEO ASSIGNABLE VIDEO (SAT/CBL) 1 PR DVD L DVD R PB SAT/ L CBL Y R ASSIGNABLE SAT/CBL ANALOG 1 (CD) AUDIO IN DIGITAL IN 1 (TV) OPTICAL ASSIGNABLE 1 (SAT/CBL) COAXIAL ASSIGNABLE HDMI OUT 2 1 1 BD HDZONE/MAIN MAIN SELECTABLE ARC CONTROL (DVD) HDMI IN 2 3 (SAT/CBL) ASSIGNABLE 1 - 6 4 6 /MHL (OUTPUT 5 V 0.9 A MAX) VIDEO IN COMPONENT VIDEO ASSIGNABLE VIDEO (SAT/CBL) 1 PR DVD L DVD R PB SAT/ L CBL Y R ASSIGNABLE SAT/CBL ANALOG 1 (CD) AUDIO IN DIGITAL IN 1 (TV) OPTICAL ASSIGNABLE 1 (SAT/CBL) COAXIAL ASSIGNABLE ! If HDZONE is set to on, video images connected using a video cable or component cable are not output from the HDMI terminal. To output video images, turn HDZONE off (page 89 ). ! If you use an optical digital audio cable or RCA (analog) audio cable, you'll need to tell the receiver which digital input you connected the set-top box to (see The Input Setup menu on page 59 ). 30