Ricoh Aficio SP 1000SF Operating Instructions - Page 18
Packaging contents, Device installation, Installing the document feeder, Loading paper - toners
View all Ricoh Aficio SP 1000SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2 - Installation Packaging contents The packaging contains the items listed below: Multifunction device SP 1000SF Device installation 1 Unpack the device. 2 Install the device respecting the security notices stated at the beginning of this booklet. 3 Remove all stickers from the machine. 4 Remove the plastic protection film from the screen. Installing the document feeder 1 Secure the document feeder by fitting the two clips (B) in the notches (A) provided for this purpose. A B 1 toner cartridge 1 installation guide and 1 PC installation CD ROM Loading paper 1 Safety Guide, Command Guide (For Europe and North America only) 1 power cord 1 telephone cord (Only North America,China,Korea) 1 USB cord Loading paper in the paper tray (1) Paper to be used must be inserted face down, and abutting the side fence and back fence. Not abutting the paper may cause feed failure, skewing or paper jams. (2) Amount of loaded paper must not exceed the loading mark. If the loading mark is exceeded, this may cause feed failure, skewing, or paper jams. (3) Adding paper to the pile may cause double feeding, and should be avoided. (4) When withdrawing the cassette from the main unit, always hold it with both hands. Handling of paper (1) Curling must be corrected before loading. (2) Curls must not exceed 10 mm. (3) Care must be taken with storage to prevent feed faults and image defects due to leaving the paper in conditions of high humidity. Adding paper to the pile, or splitting the pile may cause feeding problems, and must be avoided. Humidity control (1) Paper which has become damp, or paper which has been left unused for a very long time, must not be used. (2) After opening the paper, it must be kept in a plastic bag. - 15 -