Ricoh Aficio SP 1000SF Operating Instructions - Page 23

SP 1000SF

- 20 -

3 - Copy

Resolution setup

The

RESOLUTION

parameter allows you to setup the

photocopy resolution.

±

841 - ADVANCED FCT/COPY/RESOLUTION

1

Choose the resolution with the buttons

²

or

±

according to the following table:

2

Confirm your choice by pressing the

OK

button.

Zoom setup

The

ZOOM

parameter allows you to reduce or enlarge an

area of a document by choosing the origin and the zoom

level to apply to the document, from 25 to 400 %.

±

842 - ADVANCED FCT/COPY/ZOOMING

1

Enter

the

desired

zoom

level

with

the

Alpanumerical

keyboard

or

choose

among

predefined values with the buttons

²

and

±

.

2


OK

button.

Analysis origin setup

If you want, you can change the origin of the scanner.

By entering new values for X and Y in mm (X < 210 and

Y < 280), you move the analysed area as shown on the

diagram below.

±

844 - ADVANCED FCT/COPY/ORIGIN

1

Select the X and Y coordinates with the buttons

²

or

±

.

2

Setup the desired coordinates with the digital

keyboard or the buttons

²

and

±

, confirm your

choice by pressing on the

OK

button.

Contrast setup

The

CONTRAST

parameter allows to choose the

photocopy contrast.

±

845 - ADVANCED FCT/COPY/CONTRAST

1

Setup the desired level of contrast with the buttons

²

and

±

, confirm by pressing the

OK

button.

2

You can also directly setup the desired contrast

with the

button, press several times on this

button until the desired setup without using the

Menu 845.

3

Quit this menu by pressing the

button.

Luminosity setup

The

LUMINOSITY

parameter allows to lighten or darken

your original document.

±

846 - ADVANCED FCT/COPY/LUMINOSITY

1

Setup the desired brightness with the buttons

²

and

±

.

2


OK

button.

3


button.

Paper type setup

±

851 - ADVANCED FCT/SCAN. & PRINT/PAPER

TYPE

1

Select the paper

NORMAL

or

THICK

that you use

with the buttons

²

and

±

.

2

Confirm your setup by pressing the

OK

button.

3


button.

Paper tray selection

The

Automatic

selection can have two meanings

depending on the paper format defined on the paper

trays. The following table describes the different cases.

±

852 - ADVANCED FCT/SCAN. & PRINT/TRAY

PAPER

1

Select the default paper tray to use,

AUTOMATIC

or

MANUAL,

with the buttons

²

and

±

.

2

Confirm by pressing the

OK

button.

Parameter

Signification

DRAFT

Low resolution.

AUTO

Standard resolution for documents

containing text and graphics.

QUALITY

TEXT

Optimal resolution for documents

containing text.

PHOTO

Optimal resolution for documents

containing photographies.

Note

You can also setup the resolution

by pressing the

button.

y

x

Analysed area

BEGIN. OF SHEET

END OF SHEET

Default tray

Tray used for copy

Same paper

format in the

trays

AUTOMATIC

Selection between the

main tray and the

manual tray.

MANUAL

The manual tray is

used.

Different paper

format in the

trays

AUTOMATIC

The main tray is used

MANUAL

The manual tray is

used.

Ricoh Aficio SP 1000SF Operating Instructions - Page 23

Resolution setup, Zoom setup, Analysis origin setup, Contrast setup, Luminosity setup

Page 23 highlights

Section	Page
Security	4
Security directives	4
Laser safety	4
For Europe/Asia	4
For North America	5
Declaration of conformity	5
Notice to Users in EEA Countries	5
Notice to Users Accessing Analog PSTN in EEA Countries	5
Symbols for the main power switch	5
Positions of Warning and Caution labels on the machine	5
FCC Compliance	6
Note to users in the United States of America	6
Notice about the Telephone Consumer Protection Act (Valid in USA only)	7
Note to users in Canada	7
Remarque concernant les utilisateurs au Canada	7
FCC Requirements	7
Notice to users (New Zealand)	8
Environment	9
Batteries and rechargeable batteries	9
The product	9
Users in the EU, Switzerland and Norway	9
All Other Users	9
Software use license	10
Definition	10
License	10
Property	10
Duration	10
Warranty	10
Responsibility	10
Development	10
Registered trademarks	11
Notice	11
Installation	12
Location conditions	12
Cautions of use	12
Safety information	13
Safety During Operation	13
Power Supply	14
For Fax or Telephone	14
Rules for use symbols	14
Terminal description	15
Command panel	16
Presentation	16
Entering Characters Using the Alpanumerical keypad	16
Accessing terminal functions	17
Packaging contents	18
Device installation	18
Installing the document feeder	18
Loading paper	18
Loading paper in the paper tray	18
Handling of paper	18
Humidity control	18
Handling the unit	19
Operator shocks	19
Moving the unit	19
Handling the Toner Cartridge	19
Feed cassette paper insertion	19
Cartridge installation	19
Paper delivery stop	20
Starting your device	20
Device connection	20
Paper insertion in the manual input tray	21
Copy	22
Simple copy	22
ECO mode copy	22
Sophisticated copy	22
Special setup for the copy	22
Resolution setup	23
Zoom setup	23
Analysis origin setup	23
Contrast setup	23
Luminosity setup	23
Paper type setup	23
Paper tray selection	23
Sheet-feed analysis margins setup	24
Flat-bed analysis margins setup	24
Left and right printing margins setup	24
Top and bottom printing margins setup	24
Format paper setup	24
Fax	25
Fax transmission	25
Immediate transmission	25
Delayed transmission	25
Transmission with auto redial	25
Fax reception	25
Fax answering device	26
Saving an access code	26
Activating / Deactivating the answering device	26
Printing fax messages stored in the memory	26
Fax rerouting (Forwarding)	26
Activating rerouting	26
Setting the re-direction contact	26
Printing rerouted documents	27
Rerouting fax messages to a USB memory key	27
Activating rerouting	27
Printing rerouted documents	27
Transmission waiting queue	27
Performing immediate transmission from the waiting queue	27
Consulting or modifying the waiting queue	27
Deleting a transmission in memory	27
Printing a document in waiting or in deposit	28
Printing the waiting queue	28
Cancelling a transmission in progress	28
Deposit and Polling	28
Placing a document in deposit	28
Polling a deposited document	28
Parameters/ Setup	29
Date/Time	29
Your fax number/Your name	29
Type of network	29
Geographical settings	29
Country	29
Telecommunication Network	29
Language	30
Local prefix	30
Transmission report	30
Document feed type	30
Economy period	31
Reception Mode	31
Reception without paper	31
Number of copies	31
Fax or PC reception	31
Received faxes reduction mode	31
Technical Parameters	32
Printing the functions guide	33
Printing the logs	33
Print the list of setups	33
Lock the machine	33
Lock the keyboard	34
Lock the numbers	34
Read the counters	34
Sent pages counter	34
Received pages counter	34
Scanned pages counter	34
Printed pages counter	34
Display the consumables status	34
Calibrate your scanner	34
Directory	35
Creating Speed dial	35
Creating Group dial	35
Modifying a record	35
Deleting a record	35
Printing the directory	36
Saving/Restoring the directory (Smart card option)	36
USB memory key	37
Use of the USB memory key	37
Print your documents	37
Delete your files located in the key	37
Analyse the USB memory key content	38
Save a document on a USB memory key	38
Activate/deactivate file automatic deletion on a USB memory key	38
PC Features	40
Introduction	40
Configuration requirements	40
Installation	40
Install the software on your PC	40
Connections	42
Uninstall the software from your PC	42
Multifunction Terminal's Supervision	43
Checking the connection between the PC and the multifunction machine	43
MF Director	43
Graphical presentation	43
Utilities and applications activation	43
MF Monitor	44
Graphical presentation	44
Display the consumable status	44
Scan To	44
Companion Suite Pro LL functionalities	44
Document analysis	44
Printing	45
Address book	45
Add a contact to the terminal address book	45
Add a group to the terminal address book	46
Manage the address book	46
Import or export a directory	47
Fax communications	47
Presentation of the Fax window	47
Send a fax	47
Receive a fax	48
Follow-up of fax communications	49
Fax parameters	49
Maintenance	53
Service	53
General information	53
Toner cartridge replacement	53
Issues with smart cards	54
Cleaning	54
Scanner reading system cleaning	54
Printer cleaning	54
Printer external cleaning	54
Printer issues	54
Error messages	54
Paper jam	55
Scanner issues	55
Miscellaneous issues	55
Communication errors	56
Transmission from the feeder	56
Transmission from memory	56
Communication error codes	56
General codes	56
Specifications	58
Physical specifications	58
Electrical specifications	58
Environmental specifications	58