Ricoh IM C3000 User Guide - Page 226

9. Troubleshooting Sound pattern*1 Five long beeps Five long beeps (repeating four times) Five short beeps (repeating five times) 12 short beeps Condition [Auto Reset] [Sound of Less Urgent Level] [Sound of Urgent Level] [Blank Page Detected] Solution The machine has been reset to the default state after the specified period of time has passed with the machine unoperated. If you were performing and paused an operation, perform the operation from the beginning again. Check that an original is not left on the exposure glass and that paper is loaded in the paper tray. Check the message displayed on the screen, and resolve the problem by removing the jammed paper or original, or replacing the toner. Check that the original is placed in the ADF with the side to scan facing up. *1 The factory default sound pattern is used as an example in the table above. • You cannot pause an alert sound that has started. The machine continues to emit the sound until the preset sound pattern is completed. • You can specify the volume and type of alert sound in [Settings] [Screen Features Settings] [Sound]. The type of sound can be specified for each condition described in the table above. You can also specify the volume of the sound emitted when using On-hook or Immediate Transmission to send a fax in [Settings] [Machine Features Settings] [Fax Settings] [General Features] tab [Adjust Sound Volume]. Press [Home] ( ) after specifying the settings. • See "Setting the Sound Volume and Type", User Guide (Full Version). 224