Ricoh IM C3000 User Guide - Page 265

When a Message Appears While Using the Printer Function Message Cause Solution and reference "Hardware Problem: HDD" An error is occurring on the hard disk of the machine. "Hardware Problem: An error has USB" occurred on the USB interface. Turn off the power of the machine, wait for 10 seconds or more after confirming that the main power indicator is turned off, and then turn on the power. page 11 "Turning On and Off the Power" If the message persists even after you have turned the power off and then on, consider repairing the machine. "Hardware Problem: An error has Ethernet" occurred in the Ethernet interface. "Hardware Problem: Wireless Card" An error has occurred in the Wireless LAN board. Turn off the power of the machine, check that the Wireless LAN board is correctly installed in the machine, and then turn on the power. page 11 "Turning On and Off the Power" If the message persists even after you have turned the power off and then on, consider repairing the machine. "HDD is full." The area reserved for forms or fonts in PostScript 3 is full. Delete a registered form or font that is no longer necessary. "HDD is full. (Auto)" An overflow error occurred in the hard disk while storing a document printed by Normal Print as a Hold Print job by the error job storing function. • Reduce the size of the document to print. • Erase documents that are no longer needed. See "Deleting Documents Stored in the Machine" and "Erasing Documents from Document Server", User Guide (Full Version). "I/O buffer overflow." An overflow has occurred in the receive buffer. • Reduce the transmission data. • Increase the value in [I/O Buffer] on the [Settings] [Machine Features Settings] [Printer Settings] [Host Interface] tab. 263