Ricoh SP 4510SF User Guide - Page 188
Other messages, Printing was canceled by
View all Ricoh SP 4510SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
10. Troubleshooting Message "Exceeded the limit value for total data size of the selected files. Cannot select more files." Causes Solutions • The size of the selected file exceeds 1 GB. • The total size of the selected files exceeds 1 GB. Files or groups of files larger than 1 GB cannot be printed. • When the total size of the multiple files that are selected exceeds 1 GB, select files separately. • When the size of selected file exceeds 1 GB, print by using a function other than the Direct printing function from memory storage device(s). You cannot select 999 files or more at the same time. You cannot select files of different formats at the same time. Other messages This section describes likely causes of and possible solutions for the error messages that are printed on the error logs or reports. Message "86: Error" "91: Error" "92: Error" "98: Error" Causes Solutions Parameters of the control code are invalid. Check the print settings. Printing was canceled by the Check that the data is valid. auto job cancel function due to a command error. Printing was canceled because [Job Reset] or the [Stop] key was selected on the machine's control panel. Perform the print operation again if necessary. The machine could not access the hard disk correctly. Turn off the main power switch, and then back on again. If the message appears frequently, contact your service representative. 186