Ricoh SP 4510SF User Guide - Page 203
Memory is full. Press [Write], Specifications and Adding Paper
View all Ricoh SP 4510SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
When Messages Are Displayed on the Control Panel Message Causes Solutions "Memory is full. Press [Write] to write the current scanned data to the memory storage device, or press [Cancel] to delete." The scan could not be completed because there was insufficient hard disk memory at the time of saving to the memory device. Select whether or not to save the scanned document to the memory device. "Memory is full. Scanning has been cancelled. Press [Send] to send the scanned data, or press [Cancel] to delete." Because there is not enough free hard disk space in the machine for delivering or sending by e-mail while storing in the Document Server, only some of the pages could be scanned. Specify whether to use the data or not. "Memory storage device not There is no memory device detected. Insert the device." inserted. Insert a memory device, or check to see whether the memory device is properly inserted in the media slot. "No paper. Load paper of No paper is set in the one of the following sizes." specified paper tray. Load paper of the sizes listed in the message. For details about loading paper, see "Loading Paper", Paper Specifications and Adding Paper . "Orig. scanned for diffrnt fnctn." A function of the machine other than the Scanner function is being used such as the Copier function. Cancel the job that is being processed. For example, press [Exit], and then press the [Home] key. Next, press the [Copier] icon on the [Home] screen, and then press the [Stop] key. When the message appears on the screen, follow the instructions to cancel the job. "Output buffer is full. Sending the data has been cancelled. Please try again later." Too many jobs are in standby state, and sending was canceled. Retry sending after sending jobs in standby state completes. 201