Samsung CLP-365W User Guide - Page 101

Installing driver over the network 6 The searched machines will be shown on the screen. Select the one you wish to use and click OK. 7 Follow the instructions in the installation window. Silent installation Mode Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window. Command-line Parameters Following table shows commands that can be used in the command window. Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely. Command- line /s or /S Definition Starts silent installation. Description Installs machine drivers without prompting any UIs or user intervention. Command- line /p"" or /P"" Definition Description Specifies printer port. Network Port will be created by use of Standard TCP/ IP Port monitor. For local port, this port must exist on system before being specified by command. Printer port name can be specified as IP address, hostname, USB local port name or IEEE1284 port name. For example • /p"xxx.xxx.xxx.xxx" in where, "xxx.xxx.xxx.xxx" means IP address for network printer. / p"USB001", /P"LPT1:", / p"hostname" /a"" or /A"" Specifies destination path for installation. The destination path should be a fully qualified path. Since machine drivers should be installed on the OS specific location, this command applies to only application software. /n"" or /N"" Specifies printer name. Printer instance shall be created as specified printer name. With this parameter, you can add printer instances as your wishes. 2. Using a network-connected machine 101