Samsung CLP-365W User Guide - Page 97

Wired network setup You must set up the network protocols on your machine to use it on your network. You can use network after connecting network cable to a corresponding port on your machine. • For models that do not have the display screen on the control panel, use the SyncThru™ Web Service or SetIP program. - See "Using SyncThru™ Web Service" on page 156. - See "Setting IP address" on page 97. 4 Printing a network configuration report You can print Network Configuration Report from the machine's control panel that will show the current machine's network settings. This will help you to set up a network. • The machine does not have the display screen: Press the (Cancel or Stop/Clear) button for two seconds on the control panel. Using this Network Configuration Report, you can find your machine's MAC address and IP address. For example: • MAC Address: 00:15:99:41:A2:78 • IP Address: 165.254.192.192 5 Setting IP address • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 19) • TCP/IPv6 is not supported by this program. First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network. IPv4 configuration using SetIP (Windows) Before using the SetIP program, disable the computer firewall from Control Panel > Security Center > Windows Firewall. 1 Install this program from the supplied CD-ROM by double-click Application > SetIP > Setup.exe. 2 Follow the instructions in the installation window. 3 Connect your machine to the network with a network cable. 4 Turn on the machine. 2. Using a network-connected machine 97