Samsung CLX-9251NA User Manual Ver.1.03 (English) - Page 128
Cleaning paper dust stick and chargers of imaging units, Remove the paper dust.
View all Samsung CLX-9251NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Cleaning paper dust stick and chargers of imaging units The paper dust stick and the charger of imaging unit will need to be cleaned after the specified number of pages is printed out. When the message that tells you to clean the charger appears, you have to clean the paper dust stick first, then clean the charger. The time when the message appears depends on environmental factors like altitude, temperature, humidity, and so on. You need to clean the paper dust stick and the charger to maintain printing quality. If cleaning is done, the message will disappear automatically. Follow the cleaning procedure below. 1. Open the front door. CLX-92x1 / 93x1 Series SCX-812x Series 4. Remove the paper dust. 5. Insert the paper dust stick back. CLX-92x1 / 93x1 Series SCX-812x Series 2. Hold the left/right locking levers and push inward at the same time. Then remove the waste toner container. CLX-92x1 / 93x1 Series SCX-812x Series 1 1 2 6. Pull and push the corresponding charger cleaner completely as shown below (SCX-812x Series only). Do not pull the charger cleaner too hard to prevent it from separating from the machine. It can cause damage to the machine. SCX-812x Series 3. Pull the paper dust stick out. CLX-92x1 / 93x1 Series SCX-812x Series Repeat step.6 five times. Troubleshooting_ 128