Samsung CLX-9251NA User Manual Ver.1.03 (English) - Page 130

SCX-812x Series, CLX-92x1 / 93x1 Series, protect it if necessary.

Page 130 highlights

4. Remove the new imaging unit from its package. CLX-92x1 / 93x1 Series 8. Remove the tape on the imaging unit (SCX-812x Series only). SCX-812x Series Do not use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the surface of the imaging unit. 5. Go to step.9 (CLX-92x1 Series only). 6. Pull out the protecting pad (SCX-812x Series only). 9. Remove the paper protecting the imaging unit. CLX-92x1 / 93x1 Series SCX-812x Series If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. • Be careful not to scratch the surface of the imaging unit. • To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary. 7. Pull the rubber stopper out of the developer (SCX-812x Series only). 10. Hold the handles on the new imaging unit, and push the imaging unit until it locks into place. CLX-92x1 / 93x1 Series SCX-812x Series 2 1 Troubleshooting_ 130

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178

Troubleshooting
_ 130
4.
Remove the new imaging unit from its package.
SCX-812x Series
CLX-92x1 / 93x1 Series
Do not use sharp objects, such as a knife or scissors, to open the
imaging unit package. You could damage the surface of the
imaging unit.
5.
Go to step.9 (CLX-92x1 Series only).
6.
Pull out the protecting pad (SCX-812x Series only).
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
Be careful not to scratch the surface of the imaging unit.
To prevent damage, do not expose the imaging unit to light for
more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
7.
Pull the rubber stopper out of the developer (SCX-812x Series only).
8.
Remove the tape on the imaging unit (SCX-812x Series only).
9.
Remove the paper protecting the imaging unit.
SCX-812x Series
CLX-92x1 / 93x1 Series
10.
Hold the handles on the new imaging unit, and push the imaging unit
until it locks into place.
CLX-92x1 / 93x1 Series
SCX-812x Series
2
1