Sharp MX-2310U Installation Manual - Page 29
Installation of the heater unit, External fitting attachment
![]() |
View all Sharp MX-2310U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
(2) Installation of the heater unit 1) Remove the tray 1. (3) External fitting attachment 1) Attach the left cabinet lower. 2) Install the heater unit to the main unit, and secure it with the screw (M4 x 10 T-tight). Pass the harness of the heater through the hole on the main unit frame. 2 2) Install the left cabinet. 1 2 1 2 2 1 3) Fix the earth wire with a screw. Connect the connector. Pass the WH harness under the CCS-WH harness to the switch. 3) Install the rear cabinet. 2 1 2 2 CSS-WH harness WH harness 2 2 MX-2310U Dehumidifying heater 3 - 6
![](/manual_guide/products/sharp-mx2310u-installation-manual-1d69c40/29.png)
MX-2310U
Dehumidifying heater
3 – 6
(2)
Installation of the heater unit
1)
Remove the tray 1.
2)
Install the heater unit to the main unit, and secure it with the
screw (M4 x 10 T-tight).
Pass the harness of the heater through the hole on the main
unit frame.
3)
Fix the earth wire with a screw. Connect the connector.
Pass the WH harness under the CCS-WH harness to the
switch.
(3)
External fitting attachment
1)
Attach the left cabinet lower.
2)
Install the left cabinet.
3)
Install the rear cabinet.
2
1
CSS-WH harness
WH harness
1
2
2
1
2
1
2
2
2
2
2