Home » Sharp Manuals » Multifunction Devices » Sharp MX-2310U » Manual Viewer

Sharp MX-2310U Installation Manual - Page 38

MX-DE12/DE13/DE14 (STAND/1x500/2x500/3x500 SHEET PAPER DRAWER), 1. Unpacking - service manual

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

M[4X-]2310MU X-DE12/DE13/DE14 (STAND/1x500/S2exrv5i0c0e/3Maxn5u0a0l SHEET PAPER DRAWER) 1. Unpacking 2. Installation If the connector is removed first, it may be damaged during the installation procedures. Therefore, keep it packed while un-boxing. and unpack it only when connecting the connector to the machine. A. Check the packed items Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power outlet. Make double sure that the data lamp on the operation panel does not light up or blink when performing installation. A. Installation of the right adjuster 1) Attach the right adjuster included in the package to the desk unit. Insert the right adjuster until it is locked. 1 2 3 No. Name 1 Desk unit 2 Right adjuster 3 Fixing screws (M3 x 8) 4 Connection cover 4 Quantity 1 1 4 2 2) Turn each adjuster to fix the desk unit. MX-2310U MX-DE12/DE13/DE14 (STAND/1x500/2x500/3x500 SHEET PAPER DRAWER) 4 - 1

Section	Page
Transit, Installation (using) environment, Note	5
1. Installing (use) conditions	5
A. Bringing space	5
B. Installing space	5
C. Power source (Capacity, voltage, frequency, safety, plug)	5
D. Floor strength and level	5
E. Direct rays of the sun, dust, temperature, humidity, gasses, chemicals, vibration	5
F. Note for handling PWB and electronic parts	6
G. Note for proper drum, developing, fusing and transfer unit handling	7
2. Transit and delivery	7
A. Implements, facility, and manpower	7
B. Delivery	7
CONFIGURATION	8
1. System diagram	8
2. Option list	9
MX-2310U (MAIN UNIT)	10
1. Unpacking	10
A. Unpacking	10
B. Removal of the fixing tape and protection material	10
C. Check the packed items	10
D. Lock release	11
2. Installation	11
A. Developer installation	11
B. Set the control level for the reference toner density	13
C. Cleaning	13
D. Installation of the toner cartridge	14
E. Paper feed tray setup	14
F. Specifications setup	15
3. Image quality check	15
A. Execution items	15
B. Description	15
Dehumidifying heater	24
1. Parts list	24
2. Installation	27
A. Installation of the heater electric component kit	27
B. Installation of the heater kit	28
C. Installation of the scanner heater kit	30
D. Installation of the desk heater kit	33
E. Operation check after installation	37
MX-DE12/DE13/DE14 (STAND/1x500/2x500/3x500 SHEET PAPER DRAWER)	38
1. Unpacking	38
A. Check the packed items	38
2. Installation	38
A. Installation of the right adjuster	38
B. Connection of the main unit and the desk unit	39
C. Release the lock	40
D. Connector connection	40
E. Turn ON the power of the main unit	40
F. Image off-center adjustment	41
AR-SU1 (STAMP UNIT)	42
1. Unpacking	42
A. Check the packed items	42
2. Installation	42
A. Removal of the RSPF unit	42
B. Stamp unit attachment	43
C. Installation of RSPF unit	43
D. Finish stamp cartridge attachment	44
E. Turn ON the power of the main unit	44
F. Installation check	44
MX-FN17 (FINISHER)	45
1. Unpacking	45
A. Check the packed items	45
2. Installation	45
A. Removal of the paper holding arm and the paper exit full detection actuator	45
B. External fixture removal	46
C. Installation of the parts included	46
D. External fitting attachment	48
E. Installation of the finisher	48
F. Connector connection	49
G. Staple position label attachment	49
H. Turn ON the power of the main unit	50
MX-PN11A/B/C/D (PUNCH MODULE)	51
1. Unpacking	51
A. Check the packed items	51
2. Installation	51
A. Removal of the open/close cover and the path guide	51
B. Installation of the punch unit	52
C. Install of the open/close cover	52
D. Label attachment	52
E. Turn ON the power of the main unit	53
MX-TR12 (EXIT TRAY UNIT)	54
1. Unpacking	54
A. Check the packed items	54
2. Installation	54
A. Installation of the right paper exit unit	54
B. Installation of the paper exit tray	55
C. Turn ON the power of the main unit	55
D. Tray setting	55
MX-FX11 (FACSIMILE EXPANSION KIT)	56
1. Unpacking	56
A. Check the packed items	56
2. Installation	56
A. FAX unit installation	56
B. Left cabinet and shield plate disassembly	56
C. I/F cable connection	57
D. Shield plate and left cabinet installation	57
E. Turn ON the power of the main unit	57
F. Destination setting	57
G. Clear theFAX related software swithes	57
H. Line cable connection	57
MX-SM10 (EXPANSION MEMORY BOARD)	58
1. Unpacking	58
A. Check the packed items	58
2. Installation	58
A. Left cabinet and shield plate disassembly	58
B. Installation of the expansion memory	58
C. Shield plate and left cabinet installation	59
D. Turn ON the power of the main unit	59
MX-PF10 (BARCODE FONT KIT)	60
1. Unpacking	60
A. Check the packed items	60
2. Installation	60
A. Enable setting of functions	60
B. Confirmation of function enable	60
MX-FR25U (DATA SECURITY KIT)	61
1. Unpacking	61
A. Check the packed items	61
2. Installation	61
A. Left cabinet and shield plate disassembly	61
B. Program ROM attachment	61
C. Shield plate and left cabinet installation	62
D. Turn ON the power of the main unit	62
E. Enable setting of functions	62
F. Confirmation of function enable	62
MX-PB14 (PRINTER EXPANSION KIT)	63
1. Unpacking	63
A. Check the packed items	63
2. Installation	63
A. Left cabinet and shield plate disassembly	63
B. Printer control PWB installation	63
C. Shield plate and left cabinet installation	63
D. Turn ON the power of the main unit	63
3. Installation	63
MX-PUX1 (XPS EXPANSION KIT)	64
1. Unpacking	64
A. Check the packed items	64
2. Installation	64
A. Enable setting of functions	64
B. Confirmation of function enable	64
MX-PK11 (PS3 EXPANSION KIT)	65
1. Unpacking	65
A. Check the packed items	65
2. Installation	65
A. Enable setting of functions	65
B. Confirmation of function enable	65
MX-FWX1 (INTERNET FAX EXPANSION KIT)	66
1. Unpacking	66
A. Check the packed items	66
2. Installation	66
A. Enable setting of functions	66
B. Confirmation of function enable	66
MX-AMX1 (APPLICATION INTEGRATION MODULE)	67
1. Unpacking	67
A. Check the packed items	67
2. Installation	67
A. Enable setting of functions	67
B. Confirmation of function enable	67
MX-AMX2 (APPLICATION COMMUNICATION MODULE)	68
1. Unpacking	68
A. Check the packed items	68
2. Installation	68
A. Enable setting of functions	68
B. Confirmation of function enable	68
MX-AMX3 (EXTERNAL ACCOUNT MODULE)	69
1. Unpacking	69
A. Check the packed items	69
2. Installation	69
A. Enable setting of functions	69
B. Confirmation of function enable	69
Remote operation panel function Enable setting	70
1. General	70
2. Remote operation panel function password setting procedures	70
Setting, Adjustments, Operation check	71
1. Firmware version check and version up	71
2. Function and operation check	71
Setup and adjustment data recording	72