Sharp MX-2310U Installation Manual - Page 35

Paper feed tray removal, Tray 2 heater unit attachment

Get Sharp MX-2310U PDF manuals and user guides View all Sharp MX-2310U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

6) Attach the clamp to the 1CS drive unit. Pass the heater harness 2 through the clamp, and attach the snap band to the 2CS drive unit. Connect the heater harness and the heater harness 2. 2) Attach the clamp to the frame. Connect the harness of the heater unit for the tray 2 to the heater harness, and pass it through the clamp. 3) Attach the high temperature caution label to the paper feed tray 2. (6) Paper feed tray removal 1) Pull out the paper feed tray, and lift it to remove. (8) Tray 3/4 heater unit attachment 1) Pass the harness of the heater unit for the tray 3/4 through the hole in the frame. Attach the heater unit for the tray 2 to the frame, and fix it with a screw (M3 x 6). (7) Tray 2 heater unit attachment 1) Pass the harness of the heater unit for the tray 2 through the hole in the frame. Attach the heater unit for the tray 2 to the frame, and fix it with a screw (M3 x 6). 2 2 2 2 1 1 2 1 MX-2310U Dehumidifying heater 3 - 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
MX-2310U
Dehumidifying heater
3 – 12
6)
Attach the clamp to the 1CS drive unit.
Pass the heater harness 2 through the clamp, and attach the
snap band to the 2CS drive unit.
Connect the heater harness and the heater harness 2.
(6)
Paper feed tray removal
1)
Pull out the paper feed tray, and lift it to remove.
(7)
Tray 2 heater unit attachment
1)
Pass the harness of the heater unit for the tray 2 through the
hole in the frame. Attach the heater unit for the tray 2 to the
frame, and fix it with a screw (M3 x 6).
2)
Attach the clamp to the frame. Connect the harness of the
heater unit for the tray 2 to the heater harness, and pass it
through the clamp.
3)
Attach the high temperature caution label to the paper feed
tray 2.
(8)
Tray 3/4 heater unit attachment
1)
Pass the harness of the heater unit for the tray 3/4 through the
hole in the frame. Attach the heater unit for the tray 2 to the
frame, and fix it with a screw (M3 x 6).
2
1
1
1
2
2
2
2