Home » Sharp Manuals » Multifunction Devices » Sharp MX-2310U » Manual Viewer

Sharp MX-2310U Installation Manual - Page 4

Symbols used for kinds of parts, Symbols used for additional, descriptions, Turn OFF

Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Symbol Cleaning (Vacuum) Meaning (Work content) Indicates that cleaning is performed with a vacuum cleaner. Cleaning (Brush) Indicates that cleaning is performed with a brush. Oil Indicates that oil is applied to lubricate. Apply powder. Replace Indicates that setting power is applied to the photoconductor drum, the transfer belt, etc. Indicates that a part is replaced. Check Cut Indicates that a check (replacement, adjustment, cleaning) is performed. Indicates that cutting is performed. Loosen Indicates that a screw is loosened. Connect Indicates that a connector is connected. Disconnect Remove a harness. Indicates that a connector is disconnected. Indicates that a harness is unsecured. Attach a harness. Indicates that a harness is secured. Remove a clamp. Attach a clamp. Release a hook. Indicates that a hook is released. Fix a hook. Indicates that a hook is fixed. Disengage the pawl. Symbol Meaning (Work content) Engage the pawl. Screw lock Unlock Indicates that a screw is secured with adhesive. Turn OFF the power. Disconnect the power plug. 3. Symbols used for kinds of parts Symbol Meaning (Kinds of parts) Maintenance Indicates a part which is part replaced in a maintenance procedure. Consumable part Waste part Unit part Included part Indicates a consumable part such as a photoconductor, developer, a transfer belt, etc. Indicates a waste part which is consumed but excluded from the above consumable parts. (A roller, a seal, etc.) Indicates a part which is designated as a unit. Indicates a part which is included in the package 4. Symbols used for additional descriptions Symbol View from the top View from the bottom View from the front View from the back Meaning Indicates from which angle the drawing is viewed.

Section	Page
Transit, Installation (using) environment, Note	5
1. Installing (use) conditions	5
A. Bringing space	5
B. Installing space	5
C. Power source (Capacity, voltage, frequency, safety, plug)	5
D. Floor strength and level	5
E. Direct rays of the sun, dust, temperature, humidity, gasses, chemicals, vibration	5
F. Note for handling PWB and electronic parts	6
G. Note for proper drum, developing, fusing and transfer unit handling	7
2. Transit and delivery	7
A. Implements, facility, and manpower	7
B. Delivery	7
CONFIGURATION	8
1. System diagram	8
2. Option list	9
MX-2310U (MAIN UNIT)	10
1. Unpacking	10
A. Unpacking	10
B. Removal of the fixing tape and protection material	10
C. Check the packed items	10
D. Lock release	11
2. Installation	11
A. Developer installation	11
B. Set the control level for the reference toner density	13
C. Cleaning	13
D. Installation of the toner cartridge	14
E. Paper feed tray setup	14
F. Specifications setup	15
3. Image quality check	15
A. Execution items	15
B. Description	15
Dehumidifying heater	24
1. Parts list	24
2. Installation	27
A. Installation of the heater electric component kit	27
B. Installation of the heater kit	28
C. Installation of the scanner heater kit	30
D. Installation of the desk heater kit	33
E. Operation check after installation	37
MX-DE12/DE13/DE14 (STAND/1x500/2x500/3x500 SHEET PAPER DRAWER)	38
1. Unpacking	38
A. Check the packed items	38
2. Installation	38
A. Installation of the right adjuster	38
B. Connection of the main unit and the desk unit	39
C. Release the lock	40
D. Connector connection	40
E. Turn ON the power of the main unit	40
F. Image off-center adjustment	41
AR-SU1 (STAMP UNIT)	42
1. Unpacking	42
A. Check the packed items	42
2. Installation	42
A. Removal of the RSPF unit	42
B. Stamp unit attachment	43
C. Installation of RSPF unit	43
D. Finish stamp cartridge attachment	44
E. Turn ON the power of the main unit	44
F. Installation check	44
MX-FN17 (FINISHER)	45
1. Unpacking	45
A. Check the packed items	45
2. Installation	45
A. Removal of the paper holding arm and the paper exit full detection actuator	45
B. External fixture removal	46
C. Installation of the parts included	46
D. External fitting attachment	48
E. Installation of the finisher	48
F. Connector connection	49
G. Staple position label attachment	49
H. Turn ON the power of the main unit	50
MX-PN11A/B/C/D (PUNCH MODULE)	51
1. Unpacking	51
A. Check the packed items	51
2. Installation	51
A. Removal of the open/close cover and the path guide	51
B. Installation of the punch unit	52
C. Install of the open/close cover	52
D. Label attachment	52
E. Turn ON the power of the main unit	53
MX-TR12 (EXIT TRAY UNIT)	54
1. Unpacking	54
A. Check the packed items	54
2. Installation	54
A. Installation of the right paper exit unit	54
B. Installation of the paper exit tray	55
C. Turn ON the power of the main unit	55
D. Tray setting	55
MX-FX11 (FACSIMILE EXPANSION KIT)	56
1. Unpacking	56
A. Check the packed items	56
2. Installation	56
A. FAX unit installation	56
B. Left cabinet and shield plate disassembly	56
C. I/F cable connection	57
D. Shield plate and left cabinet installation	57
E. Turn ON the power of the main unit	57
F. Destination setting	57
G. Clear theFAX related software swithes	57
H. Line cable connection	57
MX-SM10 (EXPANSION MEMORY BOARD)	58
1. Unpacking	58
A. Check the packed items	58
2. Installation	58
A. Left cabinet and shield plate disassembly	58
B. Installation of the expansion memory	58
C. Shield plate and left cabinet installation	59
D. Turn ON the power of the main unit	59
MX-PF10 (BARCODE FONT KIT)	60
1. Unpacking	60
A. Check the packed items	60
2. Installation	60
A. Enable setting of functions	60
B. Confirmation of function enable	60
MX-FR25U (DATA SECURITY KIT)	61
1. Unpacking	61
A. Check the packed items	61
2. Installation	61
A. Left cabinet and shield plate disassembly	61
B. Program ROM attachment	61
C. Shield plate and left cabinet installation	62
D. Turn ON the power of the main unit	62
E. Enable setting of functions	62
F. Confirmation of function enable	62
MX-PB14 (PRINTER EXPANSION KIT)	63
1. Unpacking	63
A. Check the packed items	63
2. Installation	63
A. Left cabinet and shield plate disassembly	63
B. Printer control PWB installation	63
C. Shield plate and left cabinet installation	63
D. Turn ON the power of the main unit	63
3. Installation	63
MX-PUX1 (XPS EXPANSION KIT)	64
1. Unpacking	64
A. Check the packed items	64
2. Installation	64
A. Enable setting of functions	64
B. Confirmation of function enable	64
MX-PK11 (PS3 EXPANSION KIT)	65
1. Unpacking	65
A. Check the packed items	65
2. Installation	65
A. Enable setting of functions	65
B. Confirmation of function enable	65
MX-FWX1 (INTERNET FAX EXPANSION KIT)	66
1. Unpacking	66
A. Check the packed items	66
2. Installation	66
A. Enable setting of functions	66
B. Confirmation of function enable	66
MX-AMX1 (APPLICATION INTEGRATION MODULE)	67
1. Unpacking	67
A. Check the packed items	67
2. Installation	67
A. Enable setting of functions	67
B. Confirmation of function enable	67
MX-AMX2 (APPLICATION COMMUNICATION MODULE)	68
1. Unpacking	68
A. Check the packed items	68
2. Installation	68
A. Enable setting of functions	68
B. Confirmation of function enable	68
MX-AMX3 (EXTERNAL ACCOUNT MODULE)	69
1. Unpacking	69
A. Check the packed items	69
2. Installation	69
A. Enable setting of functions	69
B. Confirmation of function enable	69
Remote operation panel function Enable setting	70
1. General	70
2. Remote operation panel function password setting procedures	70
Setting, Adjustments, Operation check	71
1. Firmware version check and version up	71
2. Function and operation check	71
Setup and adjustment data recording	72

Match case Limit results 1 per page

Symbols used for kinds of parts

Symbols used for additional

descriptions

Cleaning

(Vacuum)

Indicates that cleaning is

performed with a

vacuum cleaner.

Cleaning

(Brush)

Indicates that cleaning is

performed with a brush.

Oil

Indicates that oil is

applied to lubricate.

Apply powder.

Indicates that setting

power is applied to the

photoconductor drum,

the transfer belt, etc.

Replace

Indicates that a part is

replaced.

Check

Indicates that a check

(replacement,

adjustment, cleaning) is

performed.

Cut

Indicates that cutting is

performed.

Loosen

Indicates that a screw is

loosened.

Connect

Indicates that a

connector is connected.

Disconnect

Indicates that a

connector is

disconnected.

Remove a

harness.

Indicates that a harness

is unsecured.

Attach a harness.

Indicates that a harness

is secured.

Remove a clamp.

Attach a clamp.

Release a hook.

Indicates that a hook is

released.

Fix a hook.

Indicates that a hook is

fixed.

Disengage the

pawl.

Symbol

Meaning (Work content)

Engage the pawl.

Screw lock

Indicates that a screw is

secured with adhesive.

Unlock

Turn OFF the

power.

Disconnect the

power plug.

Symbol

Meaning (Kinds of parts)

Maintenance

part

Indicates a part which is

replaced in a maintenance

procedure.

Consumable

part

Indicates a consumable

part such as a

photoconductor,

developer, a transfer belt,

etc.

Waste part

Indicates a waste part

which is consumed but

excluded from the above

consumable parts. (A

roller, a seal, etc.)

Unit part

Indicates a part which is

designated as a unit.

Included part

Indicates a part which is

included in the package

Symbol

Meaning

View from the

top

Indicates from which

angle the drawing is

viewed.

View from the

bottom

View from the

front

View from the

back

Symbol

Meaning (Work content)