Sharp MX-2310U Installation Manual - Page 40

C. Release the lock, D. Connector connection, E. Turn ON the power of the main unit

Get Sharp MX-2310U PDF manuals and user guides View all Sharp MX-2310U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

6) Attach the connection cover included in the package. 2) Connect the connector. C. Release the lock 1) Pull out each tray. Turn and remove the fixing material, and remove the caution sheet. Attach the removed fixing material to the position shown in the figure for storage. Close the cassette which was pulled out. 3) Split the removed cover along the perforated line. 4) Attach the cover. 1 2 Before turning on the power, check to insure that the fixing material of the tray is disengaged. If the power is turned on without disengaging the fixing material, a trouble may be resulted. D. Connector connection 1) Remove the cover from the rear side of the machine. E. Turn ON the power of the main unit 1) Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch. For setting the tray size, refer to "Tray size setup" (1-6). 2 1 MX-2310U MX-DE12/DE13/DE14 (STAND/1x500/2x500/3x500 SHEET PAPER DRAWER) 4 - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
MX-2310U
MX-DE12/DE13/DE14 (STAND/1x500/2x500/3x500 SHEET PAPER DRAWER)
4
– 3
6)
Attach the connection cover included in the package.
C.
Release the lock
1)
Pull out each tray. Turn and remove the fixing material, and
remove the caution sheet.
Attach the removed fixing material to the position shown in the
figure for storage.
Close the cassette which was pulled out.
Before turning on the power, check to insure that the fixing
material of the tray is disengaged. If the power is turned on
without disengaging the fixing material, a trouble may be
resulted.
D.
Connector connection
1)
Remove the cover from the rear side of the machine.
2)
Connect the connector.
3)
Split the removed cover along the perforated line.
4)
Attach the cover.
E.
Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
For setting the tray size, refer to “Tray size setup” (1-6).
1
2
2
1