Sharp MX-2310U Installation Manual - Page 3
Symbols in this manual, Symbols used for notes and, cautions, Symbols used in the work, contents - parts manual
View all Sharp MX-2310U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Symbols in this manual The lists of symbols used in this manual are shown below. The meaning of each symbol described in the table must be understood for proper servicing. 1. Symbols used for notes and cautions Symbol CAUTION Meaning Indicates a general caution item. HIGH TEMP Be careful of a high temperature in the fusing section. HIGH VOLTAGE DANGER Be careful of an electric shock where a high voltage is applied such as the high voltage PWB, the main charger, and the process section. Indicates danger. HANDLE WITH CARE INHIBIT Indicates a part which requires special care for handling such as the HDD, and the LSU. Indicates inhibit. Symbol OK/GOOD NO GOOD NOTE Meaning Indicates a correct procedure or result in an adjustment, etc. Indicates a wrong procedure or result in an adjustment, etc. Indicates a note. IMPORTANT REFER NEW EXAMPLE Indicates an important item. Indicates a reference page, etc. Indicates a new technology, a new method, or a new item. Indicates a description using an example. 2. Symbols used in the work contents Symbol Meaning (Work content) Adhesion Indicates that a seal, etc. is attached. NO ELECTROSTATIC CHARGE NO DUST, FINGER PRINT, DIRT, SCRATCH NO SCRATCH Be careful to keep away from static electricity. (PWB's and electric parts) Be careful not to touch directly, such as the optical section, the photoconductor, and the DV roller. Also be careful not to scratch. NO LIGHT NO SOLVENT Be careful not to expose to light, such as the photoconductor, and the test chart. Be careful not to use a solvent in cleaning, etc. NO DISASSEMLE Do not disassemble. Not serviceable. Example CCD unit. Adjustment Indicates an adjustment. Measure a dimension or a size. Apply grease Indicates that a dimension or a length is measured. Indicates that grease is to be applied. Apply conductive Indicates conductive grease grease is applied. Cleaning (Dry) Indicates clean with a dry cloth. Cleaning (Wet) Cleaning (Alcohol) Indicates clean with a cloth dampened with water. Indicates clean with alcohol. Cleaning (Blower) Indicates cleaning is done with a blower/ brush.