Sony PXW-Z190 Operating Instructions - Page 14
Remaining battery capacity/DC IN, Media indicator
View all Sony PXW-Z190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. Uploading/Number of files to transfer indicator Displayed when the NETWORK upgrade license (option) is installed. 3. Clip number/Total number of clips 4. Playback mode indicator 5. Playback format (frame rate) indicator 6. Intercom indicator Displayed when the NETWORK upgrade license (option) is installed. 7. Network client mode status indicator Displayed when the NETWORK upgrade license (option) is installed. 8. Streaming status indicator Displayed when the NETWORK upgrade license (option) is installed. 9. Playback format (picture size) indicator 10. Remaining battery capacity/DC IN voltage indicator 11. Playback format (codec) indicator 12. Media indicator A mark appears to the left if the memory card is write-protected. 13. Time data indicator The time data is displayed when Display On/Off >Timecode in the LCD/VF menu is set to On and the DISPLAY button is pressed. 14. Clip name indicator 15. Gamma display assist indicator 16. Audio level meter 17. Gamma indicator Network connection icon indicators Network mode Access point mode Station mode Connection status Operating as an access point Access point operation error Wi-Fi connected Icon Wi-Fi signal strength (4 levels) Wi-Fi disconnected (incl. during setup) Wi-Fi connection error Network mode Modem1) Connection Icon status 3G/4G signal 3G connected strength (5 levels) 3 levels for - modems without signal strength 4G connected detection - Wired LAN Network connection (3G/ 4G indeterminate) - 3G/4G disconnected (incl. during setup) 3G/4G connection error LAN connected LAN disconnected (incl. during setup) LAN connection error 1)Two modems can be connected to the camcorder. When two modems are connected, the icons change as follows depending on the modem status. Connection status Icon Two modems connected, only Modem1 in use Two modems connected, only Modem2 in use Two modems connected, both in use Intercom connection icon indicators Connection status Icon • Network Client Mode is Off None • Network Client Mode is On and headset not connected • Network Client Mode is On • Headset connected • Headset connection supported, but not connected (connection ready state) • Network Client Mode is On • Headset connected • Intercom connection disabled state 14